Spyder 600039CF Description
Spyders Tungsten Carbide-Tipped (TCT) hole saws cut more materials up to 5x faster and make up to 10x more cuts lasting longer than conventional bi-metal hole saws. TCT hole saws drill through wood, MDF, fiber cement board, porous concrete block, ceramic wall tile, plastic/PVC and more.
Spyder 600039CF Includes
Spyder 600039CF Features
- Up to 10x more cuts and up to 5x faster than standard bi-metal hole saws
- Spyders Rapid Core Eject arbor system ejects cores without prying, quickly changes diameter, cuts at an angle, and enlarges existing holes
- Drill wood, MDF, plywood, fiber cement board, porous concrete block, some brick, ceramic wall tile, plastic, PVC and more
- Tungsten carbide tipped for extended life, clean cuts and extreme material drilling versatility
- Universal thread uses Spyder arbor/pilot bits or other universal hole saw arbors
- Maximum cut depth of 2-3/8-in
- Not for drilling metal, wood with nails, or in block/brick/tile applications with a Mohs hardness of 6 or greater
- Always use a drill motor with a support handle in standard rotary drilling mode only
- Not for use in hammer mode
Spyder 600039CF Specifications
| Arbor Hex: |
10 |
| Saw Diameter(s): |
3-5/8-Inch |
| Series: |
Rapid Core Eject |
| Tipped: |
Tungsten Carbide Tipped (TCT) |
| Nominal Dimension Size: |
3-Inch PVC, 3-Inch Metal Conduit, 3-Inch Black Pipe, Old Work Electrical Box |
| 5/8-18 (Hex10) 1/2″ Hex Shank: |
Rapid Core Eject Tungsten Carbide |
Unconditional Satisfaction Guarantee
